Avalon Firestyles 564 LedgeStone Fireback - Manual (Page 3)

564 LedgeStone Fireback Installation
96100191
Page 3 of 3 17601845 - 4/2/14 Travis Industries, Inc.
Installation (continued)
1 Remove the glass frame and logs (see the installation manual for details).
2 Install the firebacks following the directions below.
Place the rear fireback in place. The side
fireback holds the rear fireback in place -
hold the rear fireback while installing the
side fireback.
Remove the clips located on the
firebox ceiling near the front (both
sides). These clips have keyhole
slots that allow removal by
loosening the screw and sliding
the clip out.
Place the side firebacks
in place.
a
1/4" Nutdriver
c
Replace the clips removed in
step “a” to secure the side
firebacks..
d
HINT: Hold the firebakcs
at an angle and pivot them
into place while installing.
NOTE:
The firebacks install on top
of the fireback floor.
b
3 Restore the fireplace to the correct configuration.