Avalon Firestyles Fyre-Stones Set C - Manual (Page 14)

Fyre-Stones Set “C”
Installation Instructions
(sku 94700764)
Page 14 of 14 17601709 - 7/17/12 © Travis Industries, Inc.
Crushed Glass Installation
It is better to use too little glass than too much. Excessive glass, especially when using propane
(LP), will lead to sooting. Place the glass as thinly as possible over the burner ports for optimum burner
performance. Do not place glass over the pilot assembly.
Crushed Glass Part Numbers
The glass is ¼” American Fireglass crushed glass. Three colors of glass are available from Travis Industries (10
lbs. – shipped in four 2.5 lb. bags):
 Platinum
(94500580)
 Reflective Bronze (94500581)
 Cobalt
(94500582)
Glass Quantity
Use the following amount of glass based on the model being used:
QUANTITY USED
MODEL Bags
Rounded
Cups
Rounded
ml
33 DVI / DVL GSR NB with Dancing-Fyre Burner 0.5 1-1/4 300
Cypress 0.7 1-3/4 420
864 HO NB with Diamond-Fyre Burner 2 5 1200
The glass is supplied from the manufacturer in 2.5 lb. bags. Depending upon appliance, you may need to
measure glass quantity. Use a liquid measuring cup to accurately determine the amount of glass used.
1 Level Cup (8 fl. oz.) (240ml) = 0.95 lbs.
So...1 Slightly Rounded Cup = 1 lb.
WARNING: Make sure the glass is a maximum
1 layer thick on LP units (NG can be up to 2
layers). If the glass is too thick it will impair
burner performance and create soot.
WARNING: Make sure the pilot is not obscured
with glass. Clear away glass, if necessary, to
ensure the pilot flame lights the burner quickly.
The completed installation looks like
the photo to the right.