Avalon Firestyles 31 DVI Insert Log Set - Manual (Page 4)

31 DVI Insert Log Set
Installation Instructions
(sku 94400991)
Page 4 of 4 17601609 - 4/5/10 © Travis Industries, Inc.
Center Twig Placement
The center twig is placed directly on the burner as shown above. Make sure it so it does not cover any burner
holes
Rockwool Installation
The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock wool
works best when it is applied in a very thin, porous layer. The best method for applying the rock wool is
to brush it on to the burner. Compress a clump of rockwool between your thumb and forefinger. Use a stiff
brush to apply a thin layer of rockwool fibers onto the burner. Do not use the entire bag of rockwool. Use
only a small amount and save the remainder. Over-use of rockwool will diminish the glow and may cause
sooting or other adverse conditions.
Ember Placement
Place a layer of embers along the edges of
the burner, rivets, and along any edges to
enhance the aesthetics of the firebox. Do
not place embers over any burner holes.
See the photo to the right.