Avalon Firestyles DVS Face - Manual (Page 2)

DVS Face Installation – With Screen (2014)
Wilmington Black 95100240 Wilmington Carbon 95100241 Rosario 95200121
Arched Black 95300191 French Cntry Black 95300195 Rect Black 95300196
Page 2 of 3 17601842 - 11/26/14 © Travis Industries, Inc.
Installation
WARNING: Turn off gas to the appliance and make sure it is fully cool prior to service.
HINT: The insert should be in place with the gas line, vent, and electrical line attached. You may pull the
insert out slightly for better access.
1 Remove the glass (see the owner’s manual).
2 Install the surround panels.
3 Install the insert brackets following the directions below.
4 Replace the glass (see owner’s manual). Install the cove covers (arched faces only - see the illustration below).
Attach the insert brackets to the
insert with the included screws.
HINT: pre-thread the holes on the
insert before installing the
brackets.
COVE COVERS - Used with Arched Faces
(included with the insert)
The cove covers are used on arched faces to prevent light from
exiting the grill. The are included with the insert. Place them
over the glass frame prior to installing the face.