Artesyn System Management Interface Based on HPI-B 2.0(Centellis 4620/4440) User's Guide (June 2014) - Manual (Page 62)

Using HPI-B
System Management Interface Based on BBS HPI-B 2.0 (Centellis 4620/4440) User’s Guide (6806800P21D) 62
4.6.8 Boot Bank Control
Boot Bank control is used to switch the boot bank of Artesyn specific dual-flash-bank boards.
This control is created for all front blades, AMCs, RTMs, and Shelf Managers. hpibootbanks
client application makes use of this control to set/get boot bank parameters.
TypeUnion.Oem.Default.BodyLength 0
TypeUnion.Oem.Default.Body 0
DefaultMode.Mode SAHPI_CTRL_MODE_MANUAL
DefaultMode.ReadOnly SAHPI_TRUE
WriteOnly SAHPI_FALSE
Oem 0
Table 4-25 IPMI Command State
SaHpiCtrlStateT Value
Type SAHPI_CTRL_TYPE_OEM
StateUnion.Oem.MId OHHPI_MANUFACTURER_ID_MOTOROLA
StateUnion.Oem.BodyLength
IPMI command request/response length ( max - 255 )
Ex: When we issue a 'Get Device ID' command like,
hpiipmi -d 1 -r 43 0 6 1
BodyLength would be 3 (0 6 1)
For the response, the BodyLength would be 16 bytes
StateUnion.Oem.Body
IPMI command request/response bytes
Request - all 0's
Response - ipmi command response bytes
Table 4-24 IPMI Command Control (continued)
SaHpiCtrlRecT Value
Table 4-26 Boot Bank RDR
SaHpiRdrT Value
RecordId
Assigned by HPI implementation