Artesyn System Management Interface Based on HPI-B 2.0(Centellis 4620/4440) User's Guide (June 2014) - Manual (Page 23)

Software Installation and Configuration
System Management Interface Based on BBS HPI-B 2.0 (Centellis 4620/4440) User’s Guide (6806800P21D) 23
OPENHPI_AUTO_INSERT_TIMEOUT
Sets the default auto-
insert timeout. If the
resource is not shelf
manager auto
activated, it starts an
auto insert timer,
otherwise the resource
stays in insertion state
until user explicitly
issues
saHpiResourceAct
iveSet API
. (This
information is taken
from PICMG Fru
Activation and Power
Descriptor record)
"block |
<0…N>"
[block]
- auto insertion
policy never executed until
user issues
saHpiResourceActiveSe
t()
<0…N>
Any positive value
would give timeout in
nanoseconds.
block
OPENHPI_AUTO_EXTRACT_TIMEOUT
Sets the default auto-
extract timeout. If the
resource is not shelf
manager auto
deactivated, it starts an
auto extract timer,
otherwise the resource
stays in extraction state
until user explicitly
issues
saHpiResourceIna
ctiveSet API
(This
information is taken
from PICMG Fru
Activation and Power
Descriptor record)
"block |
<0…N>"
[60000000000]
- 60000
seconds(in microseconds)
block
- auto extraction policy
never executed until user
issues
saHpiResourceInactive
Set()
block
OPENHPI_PATH
Search path for plugins Any valid search
path
[/opt/bladeservices/l
ib/bbs-hpib] /opt/bla
deservic
es/lib/b
bs-hpib
OPENHPI_VARPATH
path to store user
events
Any valid path
[/var/lib/bbs-hpib]
- If
OPENHPI_DEL_SAVE
is YES,
then user events are stored in
this path by default
/var/lib
/bbs-
hpib
OPENHPI_CONNECTION_PING_INTERVAL
Connection ping
interval for the clients
<0…N> [500]
- 500 milliseconds is the
default ping interval
1000 ms
OPENHPI_CONNECTION_PING_TIMEOUT
Connection timeout for
clients
<0…N> [5000]
- 5000 milliseconds is
the default timeout
5000
OPENHPID_MAX_NUMBER_OF_CONNECTION
S
maximum number of
HPI clients
<0…N> [30]
- when the client
connections reach 30, any
further connections are
rejected
30
Table 2-3 HPI Tags (continued)
Tag Description Allowed values Default in Config. file
Built-in
Default