Artesyn System Management Interface Based on HPI-B 2.0(Centellis 4620/4440) User's Guide (June 2014) - Manual (Page 24)

Software Installation and Configuration
System Management Interface Based on BBS HPI-B 2.0 (Centellis 4620/4440) User’s Guide (6806800P21D) 24
OPENHPI_START_SNMP
Start SNMP after HPI-B
daemon discovery
YES|NO
[No] - snmp is not started
[YES] - snmp is started after
HPI-B discovery
NO
OPENHPI_SNMP_SCRIPT
SNMP script to run if
OPENHPI_START_SNM
P is yes
script>
[/etc/init.d/hpibsnmp
]-
Default snmp script to be
executed
/etc/ini
t.d/hpib
snmp
OPENHPI_DAEMON_PORT
Openhpi daemon port port number
[4743]
- default port for HPI-
B daemon
4743
OPENHPI_LOGFILE
Path and Name of the
log file
Any valid name
[/var/log/bbs-hpib]
-
log file name starts with bbs-
hpib Ex: bbs-hpib00.log
/var/log
/bbs-
hpib
OPENHPI_LOGFILE_MAX
Sets the maximum
number of log files to be
created
<0…N> [2] - By default, 3 log files are
created
2
OPENHPI_LOGFILE_MAX_SIZE
Log file maximum size
<0…N> [500000]
- 500 KB is default
maximum size
500000
OPENHPI_LOGFLAGS
Flags that control
logging
"stdout |
stderr | file |
simplefile |
syslog |
prefix |
threadid" [file|prefix]
- log into a
file with prefix(
[threadid] {facility})
in each line logged
Stdout
- log to standard
output
Stderr
- standard error
Simplefile
- only one file for
logging and its name is
OPENHPI_LOGFILE
Syslog
- log into syslog
Threadid
- logging of
threadid is optional. With this
option, threadid is also logged.
stderr
OPENHPI_LOG_ERROR_FACILITIES
Facilities that should be
logged at error level
List of facilities
mentioned in the
config file
[all]
- By default, all the
facilities are logged at error
level
To mention more than one
facility, use |
Ex: core|daemon
all
OPENHPI_LOG_WARNING_FACILITIES
Facilities that should be
logged at warning level
List of facilities
mentioned in the
config file
[all]
- By default, all the
facilities are logged at warning
level
all
OPENHPI_LOG_INFO_FACILITIES
Facilities that should be
logged at info level
List of facilities
mentioned in the
config file
[all]
- By default, all the
facilities are logged at info level
all
Table 2-3 HPI Tags (continued)
Tag Description Allowed values Default in Config. file
Built-in
Default