Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (November 2014) - Manual (Page 80)

Commands Execution
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49E) 80
4.6.1 CPU
 CpuSpeedTest: Checks whether the Processor(s) frequency is in between operating limits
(upper and lower limits).
You need to enable CPU FREQUENCY related settings in BIOS.
 CpuTempTest: Reads the processor core(s) temperature levels and ensures that all cores
are operating in normal levels.
 CpuBurnTest : This test constantly cycles FPU intensive functions.The resultant
calculations are constantly checked for data integrity. If the test detects erroneous data,
the test fails.
 CacheSizeTest: Verifies L1, L2, and L3 Cache sizes of CPU(s) on the board.
 CpuBenchMark: Tests different arithmetic operations and gives the results.
4.6.2 HDD
 DiskBadBlksTest: Searches for bad blocks on a device (usually a disk partition).
 DiskCntlrTest: Verifies the random data written on disks remains unchanged. It verifies
only IDE and SCSI controllers that are associated with mounted file systems. Disk
controllers associated with read-only mounted file systems are not verified.
 DiskSelfTest: Checks the electrical and mechanical performance as well as read
performance of the disk.
This test can be used to initiate short and long tests for the disk by using test arguments as
“short” and “long” respectively. The duration of the tests depends upon the size of the
hard disk being tested. For example, for a 500 GB disk, short test takes about 2 minutes
and long test may take about 2 hours and 30 minutes to complete.