Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (November 2014) - Manual (Page 19)

Concepts of ViewCheck
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49E) 19
2.6 Error ID
Error ID is to provide identification for pre-determined errors/warnings of hardware devices
generated by the device driver or the kernel on the blade. These critical and error messages are
indications of abnormal behavior on part of the kernel or the hardware device on the blade.
ViewCheck functionality attempts to detect all such errors and provides suitable information
to external high-level software intelligence to act upon.
The list of messages that constitute these errors is not standardized by the hardware device
vendor nor the Linux Kernel Community. Error ID attempts to standardize all such messages on
Artesyn blades. These messages would be OS and driver specific. Mostly, the same Error ID
would be associated with the same category of error across blades and OS. For more
information on commands, refer to
Commands Execution on page 39 .
Note: Monitor ID and Error ID are used in InService Monitoring.