Artesyn MVME4100 Single Board Computer Installation and Use (June 2014) - Manual (Page 28)

Hardware Preparation and Installation
MVME4100 Single Board Computer Installation and Use (6806800H18G) 28
2.2 Unpacking and Inspecting the Board
Read all notices and cautions prior to unpacking the product.
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment.
2. Check for damage and report any damage or differences to customer service.
3. Remove the desiccant bag shipped together with the board and dispose of it
according to your country’s legislation.
Examine and/or change environmental
parameters. MVME4100 Single Board Computer Programmer’s
Reference
Program the board as needed for your
applications. MVME4100 Single Board Computer Programmer’s
Reference
Table 2-1 Startup Overview (continued)
Task Page
Damage of Circuits
Electrostatic discharge and incorrect installation and removal can damage circuits or
shorten their life.
Before touching the board or electronic components, make sure that you are working in an
ESD-safe environment.
The product is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, contact customer service immediately.