Artesyn ARTM-9405 16x10GbE Installation and Use Guide (May 2014) - Manual (Page 54)

ARTM-9405 16x10GbE Installation and Use (6806800P45F)
Safety Notes
54
SFP/SFP+/QSFP+ Modules
Personal Injury and Damage of the RTM and SFP/SFP+/QSFP+ Modules
Installing and using SFP/SFP+/QSFP+ modules which are not fully certified and which do not
meet all relevant safety standards may damage the RTM and the SFP/SFP+/QSFP+ modules
and may lead to personal injury.
Only use and install SFP/SFP+/QSFP+ modules which are fully certified and which meet all
relevant safety standards.
Personal Injury
Optical SFP/SFP+/QSFP+ modules may be classified as laser products. When installing and
using any of these SFP/SFP+/QSFP+ modules, the regulations which correspond to the
respective laser class apply to the whole RTM. Not complying to these regulations may lead to
personal injury.
When installing and using optical SFP/SFP+/QSFP+ modules which are classified as laser
products, make sure to comply to the respective regulations.
Eye Damage
Optical SFP/SFP+/QSFP+ modules may emit laser radiation when no cable is connected. This
laser radiation is harmful to your eyes.
Do not look into the optical lens at any time.
SFP/SFP+/QSFP+ Module Damage
The optical port plug protects the optical fibres against dirt and damage. Dirt and damage can
render the SFP/SFP+/QSFP+ module inoperable.
Only remove the optical plug when you are ready to connect a cable to the SFP/SFP+/QSFP+
module. When no cable is connected, cover the port with an optical port plug.