ARRIS TG1672G-NA Web GUI User Guide - Manual (Page 32)

Touchstone 16xx Gateway Router Setup – Web GUI User’s Guide
Page 32 of 96 November 2013
Once your account is established, perform the following steps to enable DDNS.
1. Access and log into the configuration interface.
2. Click the Utilities tab.
3. Click DDNS in the side menu to display the DDNS configuration screen.
4. Click the DDNS Enable checkbox.
Note: Refer to Utilities- DDNS in Section 2 - Web GUI Screens and Configuration
Parameter Reference for specific instructions on setting the various DDNS
configuration parameters.
5. After setting the necessary configuration parameters, click the Apply button at the bottom
of the screen.