Booting from battery – ARRIS TG852G-NA User Guide User Manual

Page 50

Booting from Battery

The TG852 supports a “Boot from Battery” feature that allows the Telephony Gate-

way to begin service without AC power.

To start the TG852 from its battery, follow these steps:

1 If a battery is already installed in the Telephony Gateway, remove it.
2 Re-insert the battery into the Telephony Gateway (see

for details).

3 Press the Reset button; the Power light should turn on immediately.

Touchstone TG852 Telephony Gateway User’s Guide

This manual is related to the following products: