Tcp/ip configuration for windows xp, Tcp/ip conﬁguration for windows xp – ARRIS TG852G-NA User Guide User Manual

Page 31

TCP/IP Conﬁguration for Windows XP

Follow these steps to conﬁgure the Ethernet interface on a Windows XP operating

system.

TCP/IPv6 Note: This procedure shows the conﬁguration of TCP/IPv4. TCP/IPv6

is not installed or enabled by default in Windows XP. If your cable

provider requires TCP/IPv6 you must ﬁrst install and enable it on your

Windows XP system. Refer to Microsoft support materials on Windows

XP for installation instructions. Once installed and enabled, follow this

same conﬁguration example, but select TCP/IPv6 at the appropriate

step.

Note:

Dialog boxes shown on your computer may differ slightly from those

shown in this procedure.

1 From the computer, select Start > Settings > Control Panel and double-

click Network Connections in the Control Panel.
The Network Connection window displays a list of LAN connections and as-

sociated network adapters.

Touchstone TG852 Telephony Gateway User’s Guide

This manual is related to the following products: