Cable modem start up sequence, Using the reset button, Resetting the router to factory defaults – ARRIS TG852G-NA User Guide User Manual
Page 49
Cable Modem Start Up Sequence
Using the Reset Button
Use the Reset button, on the back of the Telephony Gateway, to reset the modem
and perform initialization as if you power cycled the unit. You may need to reset the
Telephony Gateway if you are having problems connecting to the Internet. Using
this button will be rare.
Use a pointed non-metallic object to press this button. The photo to the left shows
the location of the Reset button. The Reset button is recessed to prevent acci-
dental resets.
The diagram on the left shows the location of the reset button.
Resetting the Router to Factory Defaults
To reset the router to factory defaults, press and hold the Reset but ton on the back
of the Telephony Gateway for more than fifteen seconds. This restores the wireless
setup configuration and router configuration parameters to the factory defaults. You
may need to do this if a misconfiguration has locked out all access.
DS
US
Online
Description
Flash
Off
Off
Downstream search
On
Flash
Off
Downstream found; upstream search
On
On
Flash
Downstream and Upstream found;
retrieving setup information from
cable operator
On
On
On
Ready for service
Touchstone TG852 Telephony Gateway User’s Guide
49
Cable
Ethernet
10/100/1000
Telephone
Reset
USB
1/2
2
2
1
4
3
Reset
Button