ARRIS TG852G-NA User Guide User Manual

Page 43

Text mode
Original mode

3 Choose Automatic from the Location drop-down menu, and Built-in Eth-

ernet from the Show menu.

4 Choose the TCP/IP tab, if necessary.

If you are using TCP/IPv4, go to step 5.

If your cable provider requires TCP/IPv6, go to step 8.

5 Choose Using DHCP from the Conﬁgure IPv4 menu.
6 If necessary, click the Renew DHCP Lease button.
7 Close the System Properties application.

TCP/IPv4 conﬁguration is completed.

Touchstone TG852 Telephony Gateway User’s Guide

This manual is related to the following products:

CM820 User Guide TG862ABS User Guide TG852G CT User Guide TM802 User Guide TG862G CT User Guide TM902 User Guide TM804 User Guide TG862G-NA User Guide TG952 User Guide TG1662G-NA User Guide TG1672G-NA User Guide DG1660A User Guide DG1670A User Guide