Argox OS-2130D - Manual (Page 7)

13
OS-2130D & OS-2130DE User’s Manual
Attaching Power
1. Make sure the printer’s power switch is in the off position (down)
before conducting following actions.
2. Insert the AC power cord into the power supply.
3. Insert the power supply’s power connector into the printer’s power
jack.
4. Plug the other end of the power cord into an appropriate grounded
AC electrical outlet.
OS-2130D
Warning:
Do not operate the printer and power supply in an area where they
might get wet.
14
OS-2130D & OS-2130DE User’s Manual
OS-2130DE