Argox OS-2130D - Manual (Page 16)

18
OS-2130D & OS-2130DE User’s Manual
Printer is in
PAUSE status Press FEED button to resume printing.
Printer is receiving data As soon as all the data has been received,
Ready LED will stay solid green and
automatically resume normal operation.
The printer has built-in monitors for the status. The status and
error indications will be displayed via the front panel LED
indicators and the alert buzzer. Generally, when a malfunction or
an abnormal condition is detected, the alert buzzer will beep for
three times, and the ERROR LED will also blink. Below list shows
the buzzer and LED indications corresponding to various errors.
19
OS-2130D & OS-2130DE User’s Manual
Situation
Buzzer
Alert
Blinking
LED
Description
MEDIA
OUT
YES
READY
POWER
Both LEDs blink
synchronously.
The media is not installed or
used up.
Printer fails to detect the
media gap.
CUTTER
FAILURE
YES POWER
Cutter failed or jammed at
cutter.
MEMORY
FULL
YES POWER
The full printer buffer is
caused by the loaded soft
fonts, graphics or forms.
Check the format of these
data. Call for service
Note:
The alert buzzer can be disabled by Printer Utility.