Argox OS-2130D - Manual (Page 27)

40
OS-2130D & OS-2130DE User’s Manual
Cleaning Direction
When cleaning the print head, always wipe in One-Way Direction -
from Left to Right only, or, from Right to Left only, to clean “Heating
Line” of print head gently without excessive stress.
Do not wipe back and forth, to avoid dust or dirt on cleaning cotton
would be attached onto print head again.
Special Caution:
Warranty of print heads will be void if print head serial number is
removed, altered, defected, or made illegible, under every
circumstance.
41
OS-2130D & OS-2130DE User’s Manual
Product Specification
General Specification
Specification OS-2130D OS-2130DE
Print method Direct thermal
Printing resolution 203 DPI (8 dots/mm)
Printing speed 2ips ~ up to 4ips (51~102mm/s)
Printing length Max 100"(2540mm)
Printing width Max 2.83" (72mm), Min 1"(25.4mm)
Memory 8MB SDRAM(6MB user available)
4MB Flash ROM(2MB user available)
CPU type 32 bit RISC microprocessor 100MHz
Sensors Reflective (Left side)
Operation interface Button(Feed) x 1
Communication
interface
RS-232, USB, Cash drawer, Ethernet(optional)
PPLA:
Internal fonts:
9 fonts with different point size
6 fonts with ASD smooth font.
Courier font with different symbol sets.)
PPLB:
Internal fonts: 5 fonts with different point size
Fonts
Soft fonts and 2-byte Asian fonts are downloadable
Ability to print any Windows True Type Font easily