Aplex Technology OPC-5127 - Manual (Page 58)

OPC-5XX7 User Manual 58
3.10 Set Administrator/User Password
When selecting this feature, the following information will be shown:
Phoenix
– AwardBIOS CMOS Setup Utility
►Standard
CMOS
Features
Load Fail-Safe Defaults
►Advanced
BIOS
Features
Load Optimized Defaults
►Advanced
Chipset
Features
Set Administrator
Password
►Integrated Peripherals Set User Password
►Power Management
Setup
Save & Exit Setup
►PNP/PCI Configurations Exit Without Saving
►PC Health Status
Esc : Quit
↑↓→← : Select Item
F10 : Save & Exit Setup
Change/Set/Disable Password
Type the password with up to 8 characters and then press Enter key. This will clear all
previously typed CMOS passwords. You will be requested to confirm the password. Type the
password again and press Enter key. You may press Esc key to abandon password entry
operation.
To clear the password, just press Enter key when password input window pops up. A
confirmation message will be shown on the screen as to whether the password will be disabled. You
will have direct access to BIOS setup without typing any password after system reboot once the
password is disabled.
Once the password feature is used, you will be requested to type the password each time you
enter BIOS setup. This will prevent unauthorized persons from changing your system configurations.
Also, the feature is capable of requesting users to enter the password prior to system boot to
control unauthorized access to your computer. Users may enable the feature in Security Option of
Advanced BIOS Features. If Security Option is set to System, you will be requested to enter the
password before system boot and when entering BIOS setup; if Security Option is set to Setup, you
will be requested for password for entering BIOS setup.
Enter Password: