Aplex Technology OPC-5127 - Manual (Page 46)

OPC-5XX7 User Manual 46
SATA Only
SATA PORT Speed Setting
Three options are available:
Disabled (Disable the feature)
Force GEN I (Enhance transfer speed to 1.5Gb/s, i.e., 150MB/s)
Force GEN II (Enhance transfer speed to 3.0Gb/s, i.e., 300MB/s)
PATA IDE Mode
The item allows you to configure PATA IDE mode. Setup option: "Secondary",
Select "Onboard Device" item and press "Enter" for setup of onboard devices, as shown by the
following figure:
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
USB Controller [Enabled]
Item Help
USB 2.0 Controller [Enabled]
USB Keyboard Support [Enabled]
Menu Level►
USB Mouse Support [Enabled]
Azalia/AC97 Audio Select [Auto]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General
Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
USB Controller
This item allows you to enable or disable onboard USB controller. Options are: Enabled and