Aplex Technology OPC-5127 - Manual (Page 51)

OPC-5XX7 User Manual 51
Former Status (restore to former status)
Turn On (start up when power is restored)
Keep Off (remain powered off)
ACPI Function
This item allows you to enable/disable ACPI functions. Options are: Enabled and Disabled.
Power Management
This category allows you to select the type (or degree) of power saving and gives you direct
assess to the following modes:
1. Suspend Mode
2. HDD Power Down
Three options are available for Power Management, including two fixed modes.
User Define---It allows you to set each mode individually. When not disabled, each of the
ranges is from 1min to 15min.
Min Saving---Minimum power management. Suspend Mode=1hr and HDD Power
Down=15min.
Max Saving---Maximum power management. Suspend Mode=1min and HDD Power
Down=1min.
Video Off Method
This item determines the display type of monitor.
V/HSYNC+Blank This option turns off the vertical and horizontal synchronization ports and
writes blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS This option controls initial display of power management signal.
Video Off In Suspend
This item determines the display type to be cleared by monitor.
Options are: Yes and No.
Suspend Type
This item is used to select suspend type. Options are: PWRON Suspend and Stop Grant.
Modem Use IRQ
This item determines the IRQ used by Modem.
Options are: 3, 4, 5, 67, 9, 10, 11 and NA.
Suspend Mode
When enabled, after the set time of system inactivity, all devices except the CPU will be shut off.
Options are: 1/2/4/8/12/20/30/40Min, 1Hour and Disabled.