Aplex Technology OPC-5127 - Manual (Page 30)

OPC-5XX7 User Manual 30
4 Ground
5 ENABKL
6 NC
23. BKL1
(2.0MM 1X6) Backlight control connector for LVDS1
Pin# Signal Name
1 +12V
2 +5V
3 Ground
4 Ground
5 LBKLT_EN
6 LBKLT_CTRL
Note: Remember that BLK1 supports LVDS1 and BLK2 supports LVDS2 during wiring.
The two must not be confused.
24. SATA1/2
SATA Connectors: two SATA connectors are provided, with transfer speed
up to 3.0Gb/s.
25. CN1
(2.5MM 1X2): an onboard 5V output connector is reserved to provide power for
IDE/SATA devices.
Pin# Signal Name
1 +5V
2 Ground
Note:
Output current of the connector must not be above 1A.