Aplex Technology OPC-5127 - Manual (Page 53)

OPC-5XX7 User Manual 53
3.7 PnP/PCI Configurations Setup
This part describes configurations to be made on PCI bus system. PCI, namely Personal
Computer Interconnect, is a computer bus that allows I/O device to operate nearly as fast as CPU in
its own way. Some technical terms will be mentioned here. We recommend that non-professional
users not make changes from factory default settings.
Phoenix
– AwardBIOS CMOS Setup Utility
PNP/PCI Configurations
Init Display First [PCI Slot]
Item Help
Reset Configuration Data [Disabled]
Menu Level
Resources Controlled By [Auto(ESCD)]
X IRQ Resources Press Enter
PCI/VGA Palette Snoop [Disabled]
** PCI Express Relative Items **
Maximum Payload Size [128]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:
Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Init Display First
PCI Slot (PCI display device)
Onboard (Onboard display device)
PCiEx (PCIE device)
Reset Configuration Data
Normally, you should set this item to Disabled. If you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the operating system cannot boot up, then