Analog Way LIVECORE PLATFORM TPP Current Programmer's Guide - Manual (Page 6)

6
PROGRAMMER'S GUIDE FOR v02.00.46
2 CONTROLING LIVECORE™
2.1 Introduction
LiveCore™ products are usually controlled by the user friendly Web RCS or by the VERTIGE high-end
remote controller, but a programming interface is also provided for automation applications.
A good practice is to setup the machine with the Web RCS and then control it with a few basic
commands like “preset recalling” and “layer input change”.
2.2 Physical interfaces
LiveCore™ is controlled through its rear
Ethernet RJ45 plug:

labeled “ETHERNET”

10/100/1Gbps compatible

auto-MDIX (which avoid need of crossover
cable to connect it directly to a computer)

Leds colors definition:
Picture 1 : RJ45 LEDs colors definition
Left LED color Definition
Off No connection or 10Mbps
Green (On) 100 Mbps
Amber (On) 1 Gbps
Left LED color Definition
Yellow (Flashing) Connection active