Analog Way LIVECORE PLATFORM TPP Current Programmer's Guide - Manual (Page 11)

11
PROGRAMMER'S GUIDE FOR v02.00.46
2.5 Commands sequencing
A complete command sequences is made of two parts: first, a read or write command issued by the
controller, second, the answer of the machine. The answer can be used as an acknowledgment. As the
input commands processing is asynchronous, the answer time is nor constant nor predictable, but on the
other side, this allows to send multiple commands in advance, as long as they are independent.
A good practice is to check commands acknowledgment before sending new block of commands.
2.5.1 Write sequence
Picture 6 : Write command sequence
2.5.2 Read sequence
Picture 7 : Read command sequence