Filter option, Pmcat, 2047pmcat – Analog Way LIVECORE PLATFORM TPP Current Programmer's Guide User Manual
Page 18: 2046pmcat, Pmlse, Pmmet, Pmscf, Pmprf, 1pmloa, Pmloa0
18
PROGRAMMER'S GUIDE FOR v02.00.46
3.2.3 Detailed commands sequence
Set the recalling filter : This command allows including or
excluding preset elements from recalling.
Syntax :
PMcat
L
F
The
associated with each element to include (not filtered elements).
Allowed values are from 0 up to 2047.
Note that adding all elements gives the value 2047, that means
“include all elements”, no filtering occurs.
Example 1 :
2047PMcat
L
F
recall all elements.
Example 2 :
2046PMcat
L
F
recall all elements except layers
sources.
Set scale enable : This command allows automatic resizing of layers due to changes in screen size. (for
example due to covering size change)
Syntax :
PMlse
L
F
Set the origin memory number : This command sets the memory number to recall.
Syntax :
PMmet
L
F
The
from 0 up to 143.
Set the destination screen number :
Syntax :
PMscf
L
F
The
are from 0 up to 7, depending on machine and configuration.
Set the Program/Preview destination value :
Syntax :
PMprf
L
F
The destination
Start the copy : Once all previous parameters are set, start the copy process.
Syntax :
1PMloa
L
F
Only value 1 is allowed, machine will immediately acknowledge the command,
then will answer the same command with the 0 value after the end of the copy.
Wait the end of the copy : This step is optional. End of copy is signaled by answering the PMloa
command with value 0. This answer cannot arrive later than a few 1/10s.
Answer :
PMloa0
C
R
L
F
Wait this answer for a few 1/10s max.
element to recall value
layers sources 1
layers positions and sizes 2
layers transparencies 4
layers cropping parameters 8
layers borders 16
layers transitions 32
layers effects 64
layers timings 128
speed parameters 256
not used 512
native background parameters 1024