AMETEK SLM-4 - Manual (Page 57)

APPENDIX A
GPIB PROGRAMMING EXAMPLE
Example Program in C
/* Link this program with appropriate *cib*.obj. */
/* This application program is written in TURBO C 2.0 for the IBM PC-AT compatible. The
National Instruments Cooperation (NIC) Model PC-2A board provides the interface between
the PC-AT and a Sorensen Electronic Load. The appropriate *cib*.obj file is required in each
program to properly link the NIC board to C LANGUAGE and include the HEADER
FILE to C LANGUAGE. */
#include
#include
#include
#include "decl.h"
/* NI GPIB CARD HEADER FILE */
main()
{
char ouster[20],rdbuf[15],spec[10];
int i,ch,load;
/* Assign unique identifier to the device "dev5" and store in variable load. check for error.
ibfind error = negative value returned. */
if((load = ibfind("dev5")) < 0)
/* Device variable name is load */
{ /* GPIB address is 5 */
printf("\r*** INTERFACE ERROR ! ***\a\n");
printf("\r\nError routine to notify that ibfind failed.\n");
printf("\r\nCheck software configuration.\n");
exit(1);
}
/* Clear the device */
if((ibclr(load)) & ERR);
{
printf("INTERFACE ERROR ! \a");
exit(1);
}
clrscr();
/* Clear load error register */
for(i=1,ch=0;i<=4;i++,ch++)
{
outstr=chan[ch];
ibwrt(load,outstr,6);
ibwrt(load,"CLER",4);
}
ibwrt( load,"NAME?",5);
/* Get the SL-series module load specification */
strset(rdbuf,'\0'); /* Clear rdbuf string buffer */
strset(spec,'\0'); /* Clear spec string buffer */
M540069-01 Rev B A-1