AMETEK SLM-4 - Manual (Page 23)

Sorensen SLM-4 Chassis Operation
3.3.2 RECALL Procedure:
For SLM AC series:
Press one of the Memory State 1 through 5 keys; the appropriate LED will be lit, and
the stored states on the SLM chassis will be sent to all modules simultaneously. If any
key is pressed on a load module, the state LED indicator turns off immediately, to
indicate that the module state no longer matches the recalled state.
For DC loads:
Use UP and Down keys to select the Memory Bank, then follow the Recall operation in
the preceding paragraph.
M540069-01 Rev B 3-3