Adtec digital YUV2QAM (version 01.02.01) Manual - Manual (Page 44)

Appendix C - Technical Specifications
Encoder Video Profiles
MPEG 2 SD Profile 1: Adaptive Field Frame (AFF) ISO13818-2 MP@ML
MPEG 2 SD Profile 2: AFF ISO13818-2 422P@ML
MPEG 2 HD Profile 2: ISO13818-2 MP@HL (1920 x 1080 or 1280 x 720)
Video Encoding Data Rates (Manual)
MPEG 2 MP@ML SD / 1 Mbs-15 Mbs - NTSC and PAL
MPEG 2 422P@ML SD / 1 Mbs-50 Mbs - NTSC and PAL
MPEG 2 MP@HL / 7 Mbs-59.5 Mbs
Video Encoding Data Rates (Automatic based on QAM Configuration)
720 P: 12-23 Mbs
1080i: 14-25 Mbs
NTSC/PAL: 15Mbs fixed
(HD rates are calculated based on video input resolution, video complexity and QAM target)
Video Input:
Connector: Connector: RCA 75 Ohm:
Interface: RCA YPbPr
SD/HD-YUV Auto frame rate and resolution detection
Connector: Connector: RCA 75 Ohm:
Interface: SD Composite (CVBS) Analog Composite NTSC and PAL
Audio Input:
Connector: Vertical single RCA jack
Interface: RCA unbalanced L+R audio
Supported Audio: (single audio pair per video encoder in two-channel mode)
Dolby Digital 2.0 (AC3) encode
MPEG1 Layer 2 encode
Dolby Digital 2.0 (AC3) passthrough
Dolby 5.1 passthrough
Analog Digital/Closed Captions/VBI VANC
Waveform or Analog (Composite):
Connector: RCA jack 75 Ohm Terminated Input
Closed Captions per CEA-608-C (2005), Closed Captions per DVS-157, Wide Screen
Signaling (WSS) per ETSI EN300294 V1.4.1 (2003-04), Teletext per ETSI EN 300 472
V1.3.1 (2003-05)
Waveform Bridging and Conversion of Video User Data
Connector: BNC 75 Ohm Terminated Input
CEA 608 to CEA 708 up-conversion