Adtec digital YUV2QAM (version 01.02.01) Manual - Manual (Page 21)

IP Destinations Menu
Control/Setting Function Options API Command
Mode Switches multicast function on
and off Off
Send *.ECMD0 MMO #
IP Address The IP Address of which the
Multicast or Unicast is broadcast.
Multicast addressing supports the
transmission of a single IP
datagram to multiple receivers.
Valid Multicast addressing range is
224.10.XXX.XXX to
239.XXX.XXX.XXX. Unicast
addressing sends a single IP
datagram to only one receiver.
The Unicast address will be the
unique IP of the receiving device.
user-defined;
numeric field
in format
xxx.xxx.xxx.xx
x
*.ECMD0 MSI #
Port port assignment used for
transmitting a multicast
user-defined;
numeric field
*.ECMD0 MSP #
RTP allows for sequence numbering
and timing for accurate playback.
On
Off
*.ECMD0 RTP #
TOS Type of Service; selects the type
of multicast that will forward the
packet.
Normal
Minimize Cost
Maximize
Reliability
Maximize
Throughput
Minimize Delay
*.ECMD0 TOS #
TTL Time-to-Live; specifies the
number of iterations or
transmissions the packet can
undergo before it is discarded
user-defined *.ECMD0 TTL #
Multicast
Connector sets the physical connector (on
the rear of the unit) to use for
multicast transmit purposes on
the indicated encode channel.
Ethernet
!GigE *.ECMD0 MCN #
FEC Mode Forward Error Correction; selects
on/off. When selected, sends two
FEC RTP streams in addition to a
source RTP stream enabling a
receiver to reconstruct missing
packets in the source stream.
On
Off
Available if RTP
selected 'on'
*.ECMD0 FEP #