Adtec digital YUV2QAM (version 01.02.01) Manual - Manual (Page 22)

The RTP Control (above) must be
set to 'on' to enable FEC.
FEC L affects the maximum burstpacket
loss that can be recovered
4-20 *.ECMD FEP #
FEC D defines latency involved in
burstrecovery
4-20 *.ECMD FEP #
FEC TOSBITS sets the Type of Service (TOS)
bits in the IP header
Normal
Minimize Cost
Maximize
Reliability
Maximize
Throughput
Minimize Delay
*.ECMD0 FEP #
Service Select Choose which Channel to include
in the TSoIP stream.
*** Useful if you would like to
generate a STPS verses a MPTS.
*** SPTS are VBR. The PSIP/PSI
will still reflect both services!
ENC1, ENC2,
Both *.ECMD0 MST #
Note: Four IP destinations are available on the product. The ‘#’ denoted in the IP
Destinations Commands above are relevant to the four destinations indexed 0 - 3.
Tables Menu
Control/Setting Function Options API Command
Tables On/Off select on/off for insertion of tables
and select the table standard being
used.
-DVB
-ATSC
-MPEG
*.ECMD TON