Chapter, Getting, Started – Adtec digital YUV2QAM (version 01.02.01) Manual User Manual
Page 11: Front, Panel, Diagram, Chapter 2 - getting started
Chapter 2 - Getting Started
Front Panel
The Function Buttons and Directional Keypad of the YUV2QAM are used to configure and
monitor the signal input and output of the device.
Panel Diagram
Front Panel LCD
There are 3 states of the front panel LCD.
1) Encoding State: When in normal encoding mode, the LCD will display the following
information. Since there are 2 encoders in the product, you can view the status of each by
pressing the down button to toggle between 1 & 2.
2) Video Loss State: When video is not detected on the selected input, the LCD will display
the following information.