Digi PortServer TS8 - Manual (Page 92)

17-2 Symptom: PortServer TS 8/16 Does Not Boot
Symptom: PortServer TS 8/16 Does Not Boot
Introduction
Use the information provided in this discussion when PortServer TS 8/16 will not complete the boot
cycle.
Procedures
Things to Try See ...
Check for hardware problems.
• "Running PortServer TS 8/16 Hardware
Diagnostics" on page 17-4
• "Running PortServer TS 8/16 POST" on
page 17-5
Check for TFTP problems if Port-
Server TS 8/16 is booting from a
TFTP host.
• "Verifying TFTP on a UNIX System" on
page 17-6
• "Troubleshooting TFTP Problems" on
page 17-6
Resetting the device to configura-
tion defaults. "Resetting PortServer TS 8/16 Configuration
to Defaults" on page 17-7
If you cannot resolve the problem,
contact Digi.
"Digi Contact Information" on page 17-16