Digi PortServer TS8 - Manual (Page 104)

17-14 Verifying the RealPort Process
Solaris: Verifying the RealPort Process
Use this topic for information on verifying that the RealPort process is running on a Solaris system.
1. Type the following command:
ps -ef|grep ncxd
2. If the information that appears is not correct, do the following:
a. Modify the /etc/rc2.d/S26realport file with the appropriate IP addresses.
b. Reboot the UNIX server.
Windows NT: Verifying the RealPort Service
Use this procedure to verify the RealPort service on Microsoft Windows NT.
1. From the Start menu, choose Settings > Control Panel > Devices > Digi RealPort.
2. If the RealPort service has not been started, choose Start.
Windows 2000: Verifying the RealPort Service
Use this procedure to verify the RealPort service (process) on Microsoft Windows 2000.
1. Right-click on My Computer, choose Properties > Hardware tab > Device Manager.
2. Expand the Multi-port Serial Adapters list if necessary and select Digi PortServer.
3. If the RealPort Service (process) is not enabled, right-click and choose Enable.