Terminal server configuration using realport -4, Terminal server configuration using realport – Digi PortServer TS8 User Manual
Page 88
17-4
Terminal Server Configuration Using RealPort
Terminal Server Configuration Using RealPort
In this example, the PortServer TS 8/16 is simply providing ports for the LAN-based host using
RealPort. The configuration is exceedingly simple because port attributes are configured on the host
itself.
Related Information
For more information on configuring:
•
The Ethernet interface, see "Configuring the IP Address" on page 2-1
•
RealPort, see "Configuring Ports for RealPort" on page 3-1
Illustration
Configuration
set config ip=192.250.150.11 submask=255.255.255.0
(1)
set ports range=2-4 dev=rp
(2)
Configuration Notes
1. The set config command configures the internet address and mask for PortServer TS 8/16 Ether-
net interface.
2. The set ports command configures ports 2, 3, and 4 for Realport. This command specifies
dev=rp, which is an appropriate device type for RealPort.
Printer
Terminal
Modem
192.250.150.11