Adamson SpekTrix - Manual (Page 42)

SpekTrix Series User Manual 42 of 72
\
1. Make sure that every box is plugged in according to factory suggested amp configurations. (See next 2 pages
for examples) You can also refer to our standard amp and pin configurations PDF’s available on our website.
www.
adamsonproaudio.com/technical_support/amp_configurations/index.htm or call 905 982 0520 for custom set-
up and support.
All SpekTrix Series enclosures use NL8 connectors between boxes.
2. Loop all cabling at the back neatly together and hook to the rigging frame or tie it close to the array using a
strap and a hadle pocket, in order to keep them neat, to avoid getting cabling stuck or pulled off.
1. When arraying SpekTrix directly to the
Rigging Frame to attain a gapless contact,
place the top enclosure’s rigging wheel to
position 2.
2. After setting-up and calibrating the
InclInometer, attach it to the rigging frame
and set your frame angle according to the
shooter file.
4.2 Flying the Array
1.
2.
1.
2.
Cabling