Adamson SpekTrix - Manual (Page 28)

Quick Start guide
SpekTrix Series User Manual 28 of 72
Speaker Selection
The software can determine the ideal quantity of boxes and the location of the rigging frame, for a given
space, however practical limitations will need to be determined by the user. The software will make it readily
apparent if you do not have enough boxes to cover the audience evenly, especially in the case of vertical
coverage.
1. Based on the number and model of boxes in stock,
enter the quantity you are likely to use per side in the
application.
2. Enter the model of boxes you plan to use in the drop down
menus. (E.g. Y-10K = Y10’s with Kevlar drivers, S8-W = SpekTrix
Wave)
Locating The Rigging Frame
A balance must be found between what is best for sound quality and what is practical for the venue
application.
1. Choose either “Flown” or “Stacked”
2. Assess which factors are predetermined by the venue and enter them. For example, the array
might need to stay at a certain height for audience line of sight, or the array might need to be a
set distance from the front of the stage because of the venue’s rigging points.
. 1X determines distance from stage, 1Z Height of the array.
It is often useful to hit “AUTO SHOOT” at this point, to get a starting height and frame angle.