Adamson SpekTrix - Manual (Page 16)

Dimensions & Weight
Height (cm) 8.6” (22)
Width (cm) 27.9” (71)
Depth (cm) 18.91” (48)
Weight (Kg) 62lb (29.0)
Shape 5 degree trapezoid
Box Finish
Hardware Finish Waterborne Acrylic
Water Based Bake Enamel
Optional Accessories Aluminum Rigging Frame
Rigging AIR™ Revolving Disk Rigging
with 6 precise rigging angles
on a logarithmic scale
Protective grille 16 Gauge cold steel
Cabinet Construction Rugged 11 ply Baltic Birch
Specifications are subject to change without notice.
PHYSICAL DATA FEATURES
TECHNICAL DATA
The Adamson SpekTrix is a three-way cabinet that
exhibits extremely high output for a compact box. The
enclosure incorporates two unique Adamson 8.5” Kevlar,
neodymium drivers - one ND8-L mid-bass driver and
one ND8-M mid-range driver, and one B&C DE 900
compression driver mounted on a patented Adamson
wave shaping sound chamber.
The sound chamber has a defined coverage pattern of
5-degrees V by 120-degrees H, and is similar to the inner
body of a Y-Axis drive module, giving the SpekTrix a slightly
curved, iso-phase wave front comparable to that of the
Y-Axis system.
The SpekTrix features AIR™ system revolving disk flying
hardware that is recessed, attached and hidden inside
the box when arrayed, making the cabinets perfect for
industrial applications where you want a system to look
discreet. A single person can easily set up an entire
array.
The SpekTrix rigging frame is equipped with a single
threaded moving pick point, so the center of balance
and tilt angle can be precisely adjusted with little effort.
The sleek, trapezoidal SpekTrix cabinet weighs only 62 lbs,
and is constructed from rugged 5/8” Baltic birch with a
dual component black speckle coat finish. All SpekTrix
cabinets are supplied with lightweight, rugged aluminum
dolly boards (four cabinets per dolly), with flight cases
available upon request.
Frequency Response (+/-dB)
Full Range Preset 80 Hz to 18 KHz
With Sub 5 Hz To 18 kHz
Frequency Range
with Xover Preset 110 Hz – 18 kHz
Maximum SPL
(Continuous / Peak)
with Xover Preset 10.1dB / 16.1dB
with Full Range Preset 129.8dB / 15.8dB
Directivity
Horizontal 120 degrees
Vertical (per element) 5 degrees
Sensitivity (2.8V @ 1m)
LF
94.5dB / 80 Hz – 250 Hz
MF 99dB / 250 Hz – 900 Hz
HF 112dB / 900 Hz – 18 kHz
LF Section (Impedance
ohms)
ND8-L 8.5” Kevlar
neodymium Mid-Bass
driver (8ohms)
MF Section (Impedance
ohms)
ND8-M 8.5” Kevlar
neodymium Mid-Range
driver (8ohms)
HF Section (Impedance
ohms) B&C DE 900 1.5”
compres. driver (8 ohms)
Power Handling
(AES Program / Peak) LF
250 /500 / 1000
MF 250 / 500 / 1000
HF
80 / 160 / 20
Connection Neutrik Speakon™ NL8
technical specifications