Adamson SpekTrix - Manual (Page 38)

SpekTrix Series User Manual 8 of 72
IInstalling the SpekTrix System is simple, fast and safe.
A SpekTrix array can be installed in less than 10-15 minutes depending of the lenght of the array.
For a efficient and fast installation, (allthough the spekTrix system can be installed by a single person), a system
Technician, a stage hand and a rigger who in charge of the hoist remote, should be present.
The technician and stage hand are in charge of prepping the array prior to installation.
The array geometry and positioning is determined by the Shooter Software prior to installation.
it’s important to have the design on a computer screen or as a print out available, to easily determine frame
and cabinet angles among other details.
You can also refer to the “SpekTrix Configuration Examples” for further ideas on the diverse uses and set-ups
achieved with the SpekTrix Series.
Array positioning of zero through five degrees per enclosure can be set without the use of any
additional hardware Using the built-in AIR™system. Six precise rigging angles on logarithmic increments
are implemented by the insertion of stainless steel push pin into precision machined sliding bars that
extend from their home position to link the rear of the enclosures.
Between first SpekTrix Enclosure & rigging frame Always use position 2
4.2 Flying the Array
SpekTrix Subs flown in Cardioid with an underhang of 8 SpekTrix
cabinets. 6 SpekTrix flown