Zilog ZAURCT - Manual (Page 24)

UM022903-0311 ZAURA System Installation and Configuration
ZAURA ™ RF Wireless Lighting Control
Installation Guide
18
Configuring ZAURA Masters
The configuration settings built into the ZAURA Detector’s Master unit allow for perfor-
mance adjustments of the Master to satisfy user preferences and environmental conditions.
Adjustments can be made using the DIP switches and POTs to:
• Toggle lamps
• Test occupancy detection
• Adjust light and occupancy sensitivity

How to perform each of these adjustments is described in this section.
Figure 13 shows the location of each configuration interface on the ZAURA Detector.
To always start from a known state, and to therefore prevent unintended association be-
tween the Master and its starters, ensure that the Master does not contain a battery before
configuring the Master.
Figure 13. Location of Master Configuration Settings
Caution: