Zilog ZAURCT - Manual (Page 20)

UM022903-0311 ZAURA System Installation and Configuration
ZAURA ™ RF Wireless Lighting Control
Installation Guide
14
There are 3 basic types of luminaries:
• Luminary using the original starter (no change)
• ZAURA Standard Luminary
• ZAURA Virtual Dimming Luminary

Items to consider when determining luminary configuration:
• You may find it necessary to keep one or more luminaries configured with original unit
starters due to safety reasons. If no movement is detected and the room lights turn off,
there will remain enough light from these luminaries to navigate the area.
• Room dimensions or environmental conditions could make it more practical to leave
one or two luminaries with the original starters rather than placing additional Range
Extenders to detect movement in every part of the room.
• The more luminaries that are configured with ZAURA Starters, the greater the energy
savings.
Figure 9. Example Room Configuration