Configuration tool operation – Zilog ZAURCT User Manual
Page 14
UM022903-0311
ZAURA System Operation
ZAURA
™
RF Wireless Lighting Control
Installation Guide
8
For safety reasons, non-ZAURA (original) starters can be used to allow selected lamps to
remain ON whenever the switch is ON.
Configuration Tool Operation
The ZAURA Configuration Tool, though its use can be relatively infrequent, can be
employed for the following reasons:
•
A Starter is required to be associated to a different Master
•
A Starter is required to be changed from non-dimming to dimming, or vice versa
•
A Starter is required to be associated outside of a luminary
Typically, one or two configuration tools are sufficient for a facility. The ZAURA Config-
uration Tool can be used with any ZAURA Starter, but is not required to be associated
with a Master. Refer to the
section on page 36 for more
details.
Note: