Xtramus NuOutlet-LN V1.1 - Manual (Page 5)

5
1. NuOutlet-LN Packet Accessories
NuOutlet-LN comes with the following items to connect it to a DUT (Device under Test).
Accessory Image Accessory Name Description
Cat. 5 cable
Connect this between the NuOutlet-LN and
a RJ45 socket.
Screwdriver
The screwdriver is supplied to help with
turning the Chassis ID and Slot ID dials.
Socket adaptor
Use the socket adaptor to change the
female end of the short cable into an
international socket. This is used to change
the DUTs power connector.
Short Power cable
The short power cable is attached to the
outlet power socket of the NuOutlet-LN to
attach the socket adaptor in to.
Power cables
Plug into the inlet power of the socket of the
NuOutlet-LN for use in corresponding
countries.
Note: Socket adaptor and Short Power cable are not necessary and therefore not available in
Taiwan, United States or Japan.
Here is an illustration of how a NuOutlet-LN is connected to the
DUT.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®