Xtramus MCS-2160 V1.9.2 - Manual (Page 33)

Steps for installing a Media Converter Module Card in MCS-2160
Lock the Captive Screw into the
MCS-2160 to fix the Module Card into
MCS-2160.
2.2.3. Power Module
2.2.3.1. XCP-DC-300
Steps for installing a XCP-DC-300
Installing a XCP-DC-300 into
MCS-2160 is quite simple. First of all,
attach the Power Module into the
respective slot of MCS-2160 and
push the handle of the Power Module
into the slot. After the Bracket of the
Power Module reaches the
MCS-2160, lock the captive screw
into MCS-2160 as shown by arrows 4
and 5.
Note: The XCP-DC-300 doesn’t
support hot swap. Please don’t
remove Power Module during
System operation.
33
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®