Vectronics VEC-841K User Manual

Page 12

VEC-841K Owner's Manual

Tunable SSB/CW Audio Filter Kit

! ! 18. Locate resistor R20. This is a 10K resistor (brown-black-orange).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R20, solder in place and trim the leads.

! ! 19. Locate resistor R23. This is a 10K resistor (brown-black-orange).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R23, solder in place and trim the leads.

! ! 20. Locate resistor R30. This is a 10K resistor (brown-black-orange).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R30, solder in place and trim the leads.

! ! 21. Locate resistor R31. This is a 10K resistor (brown-black-orange).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R31, solder in place and trim the leads.

! ! 22. Locate resistor R34. This is a 10K resistor (brown-black-orange).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R34, solder in place and trim the leads.

! ! 23. Locate resistor R3. This is a 24K resistor (red-yellow-orange).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R3, solder in place and trim the leads.

! ! 24. Locate resistor R22. This is a 24K resistor (red-yellow-orange).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R22, solder in place and trim the leads.

! ! 25. Locate resistor R2. This is a 100K resistor (brown-black-yellow).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R2, solder in place and trim the leads.

! ! 26. Locate resistor R14. This is a 100K resistor (brown-black-yellow).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R14, solder in place and trim the leads.

! ! 27. Locate resistor R15. This is a 100K resistor (brown-black-yellow).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R15, solder in place and trim the leads.

! ! 28. Locate resistor R17. This is a 100K resistor (brown-black-yellow).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R17, solder in place and trim the leads.

! ! 29. Locate resistor R21. This is a 100K resistor (brown-black-yellow).

Carefully bend the leads close to the resistor body as in Step #1. Insert
at R21, solder in place and trim the leads.