Vectronics VEC-841K User Manual
Page 11
VEC-841K Owner's Manual
Tunable SSB/CW Audio Filter Kit
8
! ! 6. Locate resistor R11. This is a 2.2K resistor (red-red-red). Carefully
bend the leads close to the resistor body as in Step #1. Insert at R11,
solder in place and trim the leads.
! ! 7. Locate resistor R5. This is a 4.7K resistor (yellow-violet-red).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R5, solder in place and trim the leads.
! ! 8. Locate resistor R6. This is a 4.7K resistor (yellow-violet-red).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R6, solder in place and trim the leads.
! ! 9. Locate resistor R7. This is a 4.7K resistor (yellow-violet-red).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R7, solder in place and trim the leads.
! ! 10. Locate resistor R8. This is a 4.7K resistor (yellow-violet-red).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R8, solder in place and trim the leads.
! ! 11. Locate resistor R18. This is a 4.7K resistor (yellow-violet-red).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R18, solder in place and trim the leads.
! ! 12. Locate resistor R33. This is a 4.7K resistor (yellow-violet-red).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R33, solder in place and trim the leads.
! ! 13. Locate resistor R1. This is a 10K resistor (brown-black-orange).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R1, solder in place and trim the leads.
! ! 14. Locate resistor R9 This is a 10K resistor (brown-black-orange).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R9, solder in place and trim the leads.
! ! 15. Locate resistor R12. This is a 10K resistor (brown-black-orange).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R12, solder in place and trim the leads.
! ! 16. Locate resistor R13. This is a 10K resistor (brown-black-orange).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R13, solder in place and trim the leads.
! ! 17. Locate resistor R19. This is a 10K resistor (brown-black-orange).
Carefully bend the leads close to the resistor body as in Step #1. Insert
at R19, solder in place and trim the leads.