TVLogic LVM-095W-N - Manual (Page 26)

26 Multi Format LCD Monitor
6. Button Functions
[4] ASPECT Button
[3] SCAN Button [5] Function Key Set Button
• LVM-095W supports various scan modes.
1. Press [SCAN] button continuously to activate
various scan modes: OVER SCAN -> Pixel to
Pixel -> User Aspect -> ZERO SCAN
2. The following represents the different types
of scan mode. When a scan mode is
selected, display skips the next mode if its
required condition is not met.
- OVER SCAN : Zooms in/out of the image
to 96% of its original size without changing
the aspect ratio of.
- ZERO SCAN : Zooms in/out of the image
without changing the aspect ratio.
- Pixel to Pixel : 1:1 pixel mapping of original
image. This feature is available only when
the size of the original image is bigger than
the screen size.
• Used to make a quick setting of the
Function Key.
1. Press the function button(F1~F3) on the
front of the monitor for more than 2 seconds
and activate the OSD menu as follows.
2. Move to a desired function with the[UP/
DOWN] button and press the [ENTER]
button to select.
3. Once the function is set, press the Function
button(F1~F3) to activate the function.
• LVM-095W supports various aspect ratio.
1. Press [ASPECT] button on the front of the
monitor to activate various aspect ratio.
2. Press [ASPECT] button continuously to
activate various aspect ratio: 4:3 -> 2.35:1 ->
1.85:1 -> 15:9 -> 16:10 -> AUTO -> 16:9