TVLogic LVM-095W-N - Manual (Page 17)

Multi Format LCD Monitor 17
• Monitor ID
- Sets the ID of each monitor for the TVLogic
control protocol or DYNAMIC UMD using RS-
422 communication.
- Available values are between 0 ~ 125.
• UMD Display
- This item sets UMD, ANC and DYNAMIC UMD.
* UMD : Displays user customized characters on
screen.
* ANC: Displays characters embedded in SDI
signal.
* D-UMD(TVL S8C) : Displays incoming data of
8 characters and tally signal from TVLogic
remote control program.
* D-UMD(TVL S16C) : Displays incoming data
of 16 characters and tally signal from TVLogic
remote control program.
* D-UMD(TVL D8C) : Displays incoming data
of two pairs of 8 character strings and tally
signals from TVLogic remote control program.
* D-UMD(TSL S8C) : Displays incoming data of 8
characters and tally signal from TSL protocol.
* D-UMD(TSL S16C) : Displays incoming data of
16 characters and tally signal from TSL protocol
(V3.1).
* D-UMD(TSL D8C) : Displays incoming data
of two pairs of 8 character strings and tally
signals from TSL protocol.
• UMD Character
- Customizes the characters for Under Monitor
Display.
- Alphabets, numbers and special symbols are
available.
- Maximum of 5 characters can be used.
• UMD Character Color
- Used to set the character color of UMD.
- Available colors are White, Red, Green,
Blue, Yellow, Cyan and Magenta.
- This function is activated when the [D-UMD
tally type] is in the [Default], [User color], [BG.
Color], [User tally] and [User BG] modes.
• UMD BG. Trans
- Used to set the transparency of the UMD
background.
- Available values are [Opaque], [50%], [85%]
and [100%].
• UMD Size
- This function adjusts the size of UMD font and
UMD background.
- Available modes are Small and Large.
[4] GPI / UMD
5. Menu Operations