TVLogic LVM-095W-N - Manual (Page 18)

18 Multi Format LCD Monitor
[5] Waveform
• D-UMD Tally Type
- Tally type configuration setting in D-UMD(D-
8C), UMD Display.
- Configuration values are Default, User
Color, Character, BG. Color, User Tally,
User Char and User BG.
* Default : Existing TV Logic operating system (VRT)
* User Color : User configuration settings on
each Tally color type.
- Tally1 Color ~ Tally4 Color are activated
when USER COLOR is selected.
* Character : Tally displays with the character
color. Activates the same as Default model.
* BG. Color : Tally is displayed as the
background of character. Activate the same as
Default mode.
* User Tally : The bit0 & bit 1 of TSL Protocol
Control Byte receives the input signal and
displays Tally by user’s set (Off, White, Red,
Green, Blue, Yellow Cyan, Magenta)
* User Char : This function activates in the
same way as User Tally and Tally is displays
by the Character color.
* USER BG. : This function activates in the same
way as User Tally and Tally is displays in the
background of the character.
• Tally1 ~ Tally4 Color
- Used to set the color of each Tally 1, Tally
2, Tally 3 and Tally 4.
- Available colors are Red, Green and Yellow.
• B0:0 B1:0 ~ B0:1 B0:1
- The Byte0, Byte1 of TSL Protocol Control Byte
sets the color of the input conditions.
- Available colors are Off, White, Red, Green,
Blue, Yellow, Cyan and Magenta.
• Press [W-FORM/VECTOR] Button to
activate the Waveform.
• Waveform/Vector
- This function sets the Waveform and
Vectorscope. Available options are different
according to the Input signal.
- Activates in the order:
- YCbCr: Off - Waveform - VectorScope -
Waveform Wide - Waveform YCbCr - Wave_
Vector - Vector_YCbCr - Full Waveform(Y) -
Full VectorScope.
- RGB : Off - RGB.
• Waveform Intensity
- Controls the brightness of the Waveform/
Vector display.
- Available values are between 1 ~ 63. The
higher the number the brighter the waveform
will be.
• Waveform Trans.
- Controls the transparency level of the
Waveform/Vector.
- Available values are OPAQUE and TRANS.
* If the main OSD overlaps with the Waveform/
Vector when the option us set to OPAQUE, it
will automatically display it as transparent
and change back to opaque when the main
OSD disappears.
• Waveform Size
- Controls the size of Waveform/Vector
- Available modes are Normal and Large.
[4] GPI / UMD
5. Menu Operations